1" Up To 6" Inch Od 1.6mm Wall Exhaust Pipe Straight Tube Mild Steel X 1 Metre

Specs:

  • Outside Diameter - 1 1/4" Or 31.8mm
  • Outside Diameter - 1 3/8" Or 35mm
  • Outside Diameter - 1 1/2" Or 38.1mm
  • Outside Diameter - 1 5/8" Or 41.3mm
  • Outside Diameter - 1 3/4" Or 44.45mm
  • Outside Diameter - 1 7/8" Or 47.6mm
  • Outside Diameter - 2" Or 50.8mm
  • Outside Diameter - 2 1/4" Or 57.15mm
  • Outside Diameter - 2 1/2" Or 63.5mm
  • Outside Diameter - 2 1/2" Or 63.5mm
  • Outside Diameter - 3" Or 76.2mm
  • Outside Diameter - 3 1/2" Or 88.9mm
  • Outside Diameter - 4" Or 101.6mm
     
  • Wall Thickness - 1.6mm
  • Semi Bright Mild Steel
  • Flare length - 2" or 50mm
  • Larger Length Available But Must Be Shipped With Courier. Please Contact Us For Courier Costs

The tube is made from the highest quality materials on offer in Australian. Its made to Australian standards and will easily cope with the extreme conditions of an exhaust. The tube can be easily formed and bent to any requires necessary. The tube is semi bright so it has a nice finished surface which has a oily firm put on over the top to stop any rusting. It is recommended not to handle the tube often as this can wipe away the rust protection. The tube comes in 6 metre lengths and is cut down into 1 metre length to be sent out. Larger lengths can be ordered but will need to be shipped with a courier. Contact us for cost. The tube is well suited for car, bike, boat exhausts as well as many others. There are a bunch of ways to weld the tube together but we would highly recommend them to be MIG or TIG welded together to receive the best possible finish. We also sell double couplers & clamps to join tube to bends or other parts of the exhaust for the customer who may not have welding facilities available.

 

SKU STMS
Brand ECS Exhaust
Shipping Weight 2.0000kg
Shipping Width 0.040m
Shipping Height 0.040m
Shipping Length 1.000m
Shipping Cubic 0.001600000m3

ECS covers all the angles!

24 September 2021
I've recently set up an account with ECS. My first order in and I'll be back. What they did with this small pipe, 1 flare, double flare, expand or shrink, accurate base angles with quality steel, is immensely helpful for the tradie looking to reduce cost and time wasted on screwing around guessing or not being able to justify their own mandrel bender. In my case, I'm just happy that the launch date for my Rocket to Mars has been brought forward thanks to ECS!
(5)

Exhaust Tubing

16 October 2018
Accurate and convenient at a very reasonable price. Handy for small projects without compromising quality. Recommend to all.
(5)

Exhaust tubing

16 October 2018
Accurate and convenient at a very reasonable price. Handy for small projects without compromising quality. Recommend to all.
(5)

Awesome service

13 September 2018
Great product and service. The only thing that was a bit annoying was the postage speed. It went from Somersby north to Tuggerah, then south to Chullora, then to Newcastle. That's Australia post for you. Keep up the good work
(5)

2" Tube 1 meter length: Good tube,

21 July 2017
Very happy with these tubes, they came well packaged, individually wrapped in oily plastic. Nicely finished tubes, they weld nice and look good.
(5)

Write a product review

Q - What grades of stainless steel do you stock?
A - We offer 3x different grades of stainless steel. Our straight tube comes in 304 or 316 stainless. Our stainless steam straight pipe is a 304 grade.
Stainless steel mandrel bends come in 201, 304 & 316 stainless (different sizes and angles available depending on the grade), our catalytic converters are in a 409 stainless steel.

 

Q - What is the difference between TUBE and PIPE?
A - The difference between tube and pipe lies in the way it is measured. Pipe uses a nominal bore measurement, which utilises the inside diametre as well as the schedule (wall thickness). Tube is measured OD - outside diametre.

 

Q - What is the best material to use for turbo manifolds?
A - When fabricating turbo manifolds, steam pipe has a thicker wall that allows it to cope with the extreme heat exposure. We offer a range of steam products - mild and stainless bends as well as straight pipe lengths.

 

Q - What does CLR stand for?
A - Centre Line Radius is the distance from the center of curvature to the centerline (axis) of the pipe, expressed as a number multiplied by the pipe or tube size. 

 

Q - Can you use petrol cats (catalytic converters) on diesel engines?
A - The cells of catalytic converters have a washcoated surface that makes them unsuitable for use in diesel engines.


Q - What are your size and angle ranges in mandrel bends?
A - We stock a large range of mandrel bends to suit most applications, including car, boat, bike, food grade or for commercial applications.

Bends are available in 3 types of material - mild steel, stainless steel and aluminium.

Stainless steel bends start as small as 1" and go through to 4" - mild steel bends start in 1 1/4" and go up to 4", and alloy bends start at 2" and go to 3 1/2".

Angle ranges vary depending on the material, our mild steel bends have the largest angle range available: 25, 30, 45, 60, 75, 90,125 & 180deg bends in most sizes (from 3.5" up we have just 45 & 90deg bends).

Our stainless steel comes in a 'long leg' and 'short leg' option depending on the grade of stainless you're after. Our long leg bends have much the same range of angles available as the mild steel bends offer. The short leg bends are sold in 45, 90 & some in 180deg.